usxgmii vs usxgmii-m：Ethernet Transceivers (PHY)

Ethernet Transceivers (PHY)

2.5GEthernetPHY(4port),USXGMII-M.10,100,1000,2500.SGMII+,USXGMII-M...2.5GEthernetPHY(4port),USXGMII-M,MACSEC,IndustrialTemp.10,100 ...。其他文章還包含有：「DifferencebetweenUSGMIIandUSXGMIIandwhy...」、「HowtoconnectLS1046Ato10GPHYusingUSXGMII」、「Marvell®Alaska®MMulti」、「TDA4VH-Q1」、「usgmii」、「USXGMIISubsystem」、「【以太网硬件二十】USXGMII是什么？」、「常見以太網接口介紹」、「常见以太...

Provide From Google

Difference between USGMII and USXGMII and why ...

https://community.cisco.com

USGMII is used for 8x10M/100M/1GE network ports, with each port maximum speed of 1GE. · USGMII is used for 10M/100M/1G network port speeds, while USXGMII support ...

Provide From Google

How to connect LS1046A to 10G PHY using USXGMII

https://community.nxp.com

I got 10 GbE working using XFI, but slower speeds (100M/1G/2,5G/5G) don't. I wonder if I can use USXGMII. Here is why: I'm using SerDes protocol ...

Provide From Google

Marvell® Alaska® M Multi

https://www.marvell.com

The 88E2180 device supports multiple network ports over a single SERDES for Multi-Gigabit technology at 5G/2.5G/1G/100M/10M data rate through USXGMII-M ...

Provide From Google

TDA4VH-Q1

https://e2e.ti.com

In TDA4VH datasheet, it describes 5Gb XFI in page1, but in page7 described XFI support 5Gb and 10Gb.So, I'm confused which one is correct?

Provide From Google

usgmii

https://developer.cisco.com

The Universal Serial Media Independent Interface for carrying MULTIPLE network ports over a single SERDES (USXGMII-M) for Multi-Gigabit technology at 10M/100M/ ...

Provide From Google