Dial indicator manual:DIAL GAUGE
DIAL GAUGE
FormarkingacceptancerangeforPass/Failtesting.MainScaleindicator.MainScale,rotateBezel(⑩)toturn.ClampsScaletopreventrotation.。其他文章還包含有:「DialIndicator」、「DialIndicatorAssemblyandUserInstructions」、「DialIndicatorsDialTestIndicators」、「DialTestIndicator」、「DIALTESTINDICATORS」、「Full-Instructions-Logic」
查看更多 離開網站Dial Indicator
https://shop.mitutoyo.eu
After mounting the dial indicator on it, bring the contact point into contact with a workpiece. Lightly push the bezel with a finger from above or below. The ...
Dial Indicator Assembly and User Instructions
https://www.stemco.com
STEP 1. Attach the stand to the magnetic base by threading the set nut onto the stand as far as it will go (do not tighten). Insert the stand into the magnetic ...
Dial IndicatorsDial Test Indicators
https://www2.mitutoyo.co.jp
To avoid cosine-effect error, ensure that a dial indicator is mounted with its spindle in line with the intended measurement direction. □ Dial gage and ...
Dial Test Indicator
https://shop.mitutoyo.eu
1) Measurement direction and contact point angle. • Set the contact point at a right angle to the measurement direction for the workpiece.
DIAL TEST INDICATORS
https://www.mitutoyo.com
Limit hands (optional) can be attached to the bezel the same as for dial indicators, allowing easy identification of the upper and lower limits of tolerance.
Full-Instructions-Logic
https://www.dialindicator.com
1. Batteries. The lithium battery used in this indicator is an IEC standard, type CR2450. The indicators are shipped with the batteries installed.