ESP32 USB driver：Installing ESP32 drivers on Windows

CP210x USB to UART Bridge VCP Drivers

https://www.silabs.com

The CP210x USB to UART Bridge Virtual COM Port (VCP) drivers are required for device operation as a Virtual COM Port to facilitate host communication with ...

ESP32 Serial Drivers

https://meshtastic.org

Instructions for installing ESP32 USB serial drivers to interact with a Meshtastic device.

ESP32 USB Driver Installation

https://www.youtube.com

ESP32 輔助開發板：Woody

https://sites.google.com

ESP32 開發板驅動程式. 市面上常見的USB 轉UART 的晶片，驅動程式的連結在標題中，點選可下載. 如果覺得麻煩，可以考慮Zadig，它是一款協助辨識晶片及安裝驅動程式的軟體。

ESP32安裝

https://hackmd.io

... USB驅動程式，目前ESP32大部分採用CH340或者CP2102與電腦溝通並上傳程式，傳統UNO則是CH340，目前windows或MAC系統都沒有內建驅動，因此當您接上ESP32的USB後，還需要安裝驅動。

Establish Serial Connection with ESP32

https://docs.espressif.com

Connect the ESP32 board to the PC using the USB cable. If device driver does not install automatically, identify USB-to-UART bridge on your ESP32 board ...

Install ESP32ESP8266 CP210x USB Drivers (Windows PC)

https://randomnerdtutorials.co

To program or exchange information between your computer and an ESP32/ESP8266 chip, you need to install the CP210x USB to UART Bridge Virtual COM Port drivers.

USB Device Driver - ESP32-S2

https://docs.espressif.com

The driver allows you to use ESP32-S2 chips to develop USB devices on a top of TinyUSB stack. TinyUSB is integrated with ESP-IDF to provide USB features of the ...

[ESP32教學#2] NodeMCU

https://www.chosemaker.com

1. 先安裝NodeMCU-32S USB CH340的驅動程式，點我下載 · 2. 至Arduino官網下載Arduino IDE，請點此下載，並安裝完成.