IP Routed subnet：Routing a Subnet to an IP
Routing a Subnet to an IP
TorouteasubnettoanotherIP,senda.PUTrequestto/ip/IP_ID,wherethe.IP_IDbelongstothesubnetyouwishtoroute,withthetargetIPasthe。其他文章還包含有：「HowtoUseRoutedSubnet」、「IPRoutedSubnetandNAT」、「IPRoutingandSubnets」、「IPv4」、「Routedsubnets」、「UseaPublicIPonLANusing'IPRoutedSubnet'Interface」、「VigorRouterFAQ」、「WhatistheRoutedIPAddressBlock?」
查看更多 離開網站
How to Use Routed Subnet
https://www.clouvider.com
A routed subnet directs all IPs within the subnet to the main IP. This setup eliminates the need for an additional gateway.
IP Routed Subnet and NAT
https://community.spiceworks.c
I've managed to have “IP Routed subnet” enabled (which is very easy to accomplish) and the devices can be reached from outside on their public ...
IP Routing and Subnets
https://www.eventhelix.com
Routers carry traffic from one network/subnet to another. Routers maintain a routing table to decide how to route the IP packets. Each routing entry consists of ...
IPv4
https://hackmd.io
若想知道一個IP 是否屬於該subnet，則把該IP 跟該subnet 對應的subnet mask 做位元 & 。 之後去查路由表，並且依照這個結果決定往哪個port 或哪台路由器送。
Routed subnets
https://developers.cloudflare.
When you specify a static address for the LAN interface, you indicate both the interface's address as well as the subnet it attaches to. For example, 192.168.
Use a Public IP on LAN using 'IP Routed Subnet' Interface
https://www.draytek.com
The following shows how to set up a non-NAT subnet so that the server behind Vigor Router can use the public IP address 211.100.200.154.
Vigor Router FAQ
https://www.draytek.co.uk
IP routed subnet setup. Click on [LAN] > [General Setup] and select details page next to IP Router Subnet. Enable it and put another public IP address ...
What is the Routed IP Address Block?
https://www.reddit.com
The Routed IP block are the static IPs you would assign directly to servers or NAT'd to individual internal server IPs. Some ISPs have the ...