SAC305 specific Heat：SAC 305 Lead
SAC 305 Lead
MeltingTemp(°F).423.MeltingTemp(°C).217.Density(lbs/in³).0.267.SpecificGravity(g/m³).7.40.Hardness(HV).14.1.SpecificHeatCapacity(J/Kg).。其他文章還包含有：「alpha®vaculoy®sac300」、「KesterSAC」、「LeadfreesilverwavesolderingbarSAC305」、「LINQALLOYSW」、「SAC305LeadFreeSolderWire(RA)4925–4926...」、「SAC305lead」、「SolderBar」、「TECHNICALBULLETINALPHA®VaculoySAC305」、「TECHNICALDATASHEET」
查看更多 離開網站
alpha® vaculoy® sac300
https://www.macdermidalpha.com
If used for selective soldering, a solder pot temperature of 280 to 320 °C (536 to 608 °F) is recommended.
Kester SAC
https://www.kester.com
Specific Heat Capacity. 0.232 J/g K. Hardness. 14.1 HV. Application. SAC305 is suitable for lead-free wave and selective soldering. A solder pot temperature of ...
Lead free silver wave soldering bar SAC305
https://www.bbiensolder.com
LINQALLOY SW
https://www.caplinq.com
Melting Temperature (Solidus): 217°C; Melting Temperature (Liquidus): 219°C; Spheroid Tolerance : Within 1.5%.
SAC305 Lead Free Solder Wire (RA) 4925–4926 ...
https://assets.tequipment.net
Tip Temperature Upper Limit. Do not exceed 350 °C [662 °F]. Coefficient of Thermal Expansion (CTE) c). 23.5 ppm/°C. Thermal Conductivity. 58.7 W ...
SAC305 lead
https://www.aimsolder.com
Typical Melting Temperature. Solidus: 217°C (423°F). Liquidus: 220°C ... Refer to the accompanying Safety Data Sheet for any specific emergency information.
Solder Bar
https://www.dyfenco.com
Solder Bar ; Specific Heat, 219, 219 ; Thermal Conductivity (W/M-K), 57.15, 57 ; Electrical Resistivity (µΩ-cm), 12.1, 10.15 ; Thermal Fatigue Properties.
TECHNICAL BULLETIN ALPHA® Vaculoy SAC305
https://www.ams-electronics.co
Specific Heat. Capacity. 0.232 J/g K. 0.236 J/g K. 0.236 J/g K. Hardness ... It is recommended that the copper is controlled at between 0.5% and ...
TECHNICAL DATA SHEET
https://assets.rs-online.com
SAC305 is a lead-free alloy ... Wave soldering pot temperature of 265-270°C (520-530°F). ▫ Refer to the flux data sheet for specific pre-heat instructions.