SAC305 mechanical properties：An insight into dynamic properties of SAC305 lead
An insight into dynamic properties of SAC305 lead
由XLong著作·2023·被引用32次—DynamicpropertiesofSAC305lead-freesolderareinvestigatedunderhighstrainratesandhightemperatures.。其他文章還包含有：「EffectofThermalAgingontheMechanicalProperties...」、「investigatingthemicrostructuralandmechanicalproperties...」、「MaterialpropertiesofSAC3051DAY(RF)at250C」、「MechanicalcharacterizationofSAC305leadfreesolderat...」、「PerformanceofSAC305andSAC305...
查看更多 離開網站
Effect of Thermal Aging on the Mechanical Properties ...
https://www.mdpi.com
Ultimate shear strength declined with thermal aging, the modulus of elasticity increased with thermal aging, and toughness decreased with aging.
investigating the microstructural and mechanical properties ...
https://intapi.sciendo.com
General tensile and hardness test The tensile properties of SAC305 and SAC405 solder alloys are mainly controlled by their microstructures, which depend on the ...
Material properties of SAC305 1DAY (RF) at 25 0 C
https://www.researchgate.net
The elastic modulus of SAC305 solder aged 1-day at 25°C increases from 40.2 GPa at the strain rate of 10 sec -1 to 43.06 GPa for strain rate of 50 sec -1 (Table ...
Mechanical characterization of SAC305 lead free solder at ...
https://ieeexplore.ieee.org
Properties of high interest include the initial effective elastic modulus, yield stress, ultimate tensile strength, and secondary creep strain rate. Prior work ...
Performance of SAC305 and SAC305
https://pure.port.ac.uk
Moreover, SAC series gives better joint strength, mechanical, thermal and fatigue properties for providing good mechanical support in electronic devices (Lee et ...
Preparation
https://www.sciencedirect.com
The shear strength of SAC305/SnBi hybrid solder joints with Co rises and then decreases with temperature. The highest shear strength of solder joints with 0.05% ...
Sn96
https://www.cynel.com.pl
Thermal conductivity, 58 W/m•K ; Tensile strength, 500 kgf/cm ; Elongation at break, 19% ; Hardness, 15 HB ; Suggested operating temperatures, 250 - 300 °C ...
Tensile properties of SAC305
https://www.researchgate.net
2. For the SAC305 solder alloy, the elastic modulus dropped by approximately 32.87%, the yield strength dropped by approximately 33.85%, and the total ...