SAC305 modulus：Material properties of SAC305 1DAY (RF) at 25 0 C
Material properties of SAC305 1DAY (RF) at 25 0 C
TheelasticmodulusofSAC305solderaged1-dayat25°Cincreasesfrom40.2GPaatthestrainrateof10sec-1to43.06GPaforstrainrateof50sec-1.。其他文章還包含有：「TensilepropertiesofSAC305」、「IndiumCorp.Indalloy®25696.5Sn3.0Ag0.5CuLead」、「CharacterizingtheMechanicalPropertiesofActual...」、「MechanicalcharacterizationofSAC305leadfreesolderat...」、「LINQALLOYSAC305」、「SAC305Lead」、「Lead」、「andrate」
查看更多 離開網站
Tensile properties of SAC305
https://www.researchgate.net
For the SAC305 solder alloy, the elastic modulus dropped by approximately 32.87%, the yield strength dropped by approximately 33.85%, and the total ...
Indium Corp. Indalloy® 256 96.5Sn3.0Ag0.5Cu Lead
https://www.matweb.com
Tensile Strength at Break, 49.6 MPa, 7200 psi ; Elongation at Break, 19.3 %, 19.3 % ; Modulus of Elasticity, 16.6 GPa, 2410 ksi.
Characterizing the Mechanical Properties of Actual ...
http://ws.binghamton.edu
In this paper, Poisson's ratio, Young's modulus, and CTE of SAC105, SAC305, and SAC405 were measured on actual solder joints at different tem-.
Mechanical characterization of SAC305 lead free solder at ...
https://ieeexplore.ieee.org
Properties of high interest include the initial effective elastic modulus, yield stress, ultimate tensile strength, and secondary creep strain rate. Prior ...
LINQALLOY SAC305
https://www.caplinq.com
Young's Modulus. 63.4. GPa. Elongation. 37.0. %. Electrical Resistivity. 13.1. µΩ·cm. Thermal Conductivity. 71.8. W/m·K. Technical Specifications. Page 2 ...
SAC305 Lead
https://www.aimsolder.com
SAC305 Electropure is a high purity lead-free alloy containing 96.5% tin, 3% silver, and 0.5% copper.
Lead
https://www.utacgroup.com
SAC305, SAC105Ni0.02, and SAC105Ni0.05 as promising ... Such strain rate dependent elastic modulus values obtained are also known as the apparent modulus.
and rate
https://www.sciencedirect.com
With increasing temperature, the elastic modulus and ultimate strength of the SAC305 solder decreased. As the strain rate increased, the elastic modulus ...