Vigor Port：Vigor設定DVR
Vigor設定DVR
2023年1月3日—Vigor設定DVR-NVR開通訊埠重導向Port80.設定方法如下.因為管理Port80和DVR一樣.因此先到.系統維護.管理.把httpport80先改為8080.。其他文章還包含有：「ConnectedwithCommunication」、「DrayTekDRAYTEKVIGOR」、「OpenPorts&PortForwardingnotworkingonaVigor2860」、「PortForwarding」、「VigorNAT通訊埠重導向範圍模式」、「VigorRouterFAQ」、「Vigor如何開啟遠端管理httphttpstelnetssh」、「Vigor更改LANP...
查看更多 離開網站
Connected with Communication
https://www.vigorplc.com
If you are using a USB port on the computer, must use Vigor's VBUSB-200 connection cable. Because PLC has a built-in USB connector as communication ports ...
DrayTek DRAYTEK VIGOR
https://www.yohohongkong.com
DRAYTEK VIGOR-P1282 千兆POE 網路智慧24 埠POE 交換機.
Open Ports & Port Forwarding not working on a Vigor 2860
https://community.spiceworks.c
I have a Draytec Vigor 2860 attached to a BT Business ADSL line with 5 useable static IPs attached. I can't get either open ports or port redirection to work ...
Port Forwarding
https://www.draytek.co.uk
To configure a Port Redirection NAT rule on the router, go to [NAT] > [Port Redirection] and click on the first available Index number.
Vigor NAT 通訊埠重導向範圍模式
https://www.ublink.org
在範圍模式下，一旦輸入了公用埠號和起始IP，就會自動計算結束IP。 Wan port 90 對應給192.168.1.10 port 90. Wan port 91 對應給192.168.1.11 port 90
Vigor Router FAQ
https://www.draytek.co.uk
You have to set up a port forward rule whereby an incoming packet on a particular TCP/UDP port is kept open and forwarded to a specific local PC.
Vigor 如何開啟遠端管理http https telnet ssh
http://59.125.9.159
系統維護. 管理. 勾選. 允許透過網際網路管理. 最主要要勾選HTTPS 伺服器. 如果有更改HTTPS 埠號. 要順便提供給對方. 最好是給標準格式.
Vigor 更改LAN Port 10
http://www.gtrotech.com
Vigor 更改LAN Port 10-100-1000 速度和開關Port · 執行putty 之後. ip 輸入Vigor Lan ip · SSH 會要求認可CA. 選是(Y) · 連通知後要輸入帳號和密碼 · 進到命令模式如果要求助 ...