draytek routing
「draytek routing」熱門搜尋資訊
「draytek routing」文章包含有:「Inter」、「IntroductiontoRoutePolicy」、「KnowledgeBase」、「RoutingFundamentals」、「SetupOSPFRoutingbetweenVigorRouters(Vigor2962...」、「VigorStaticRoutes」、「VigorRoute如何設定為純路由(Routing)模式,含補充說明...」、「VLANRoutingonVigorL2+Switch」
查看更多Inter
https://www.draytek.co.uk
This article demonstrates how to add a second LAN subnet, enable Inter-LAN routing, and restrict access to the new network for a selected device via firewall ...
Introduction to Route Policy
https://www.draytek.com
This feature allows the network administrator to manage the outbound route base on the IP address, port number, country or domain name in the packet.
Knowledge Base
https://www.draytek.com
Set up OSPF Routing between Vigor Routers (Vigor2962/3910), Change the default route by Route Policy, Use MPLS and Internet connection on your Vigor Router at ...
Routing Fundamentals
https://www.draytek.com
This article introduces the basic concept of routing and the types of routing supported by Vigor Router. By the end of this article, we hope the readers ...
Set up OSPF Routing between Vigor Routers (Vigor2962 ...
https://www.draytek.com
1. Go to Routing >> OSPF. Check Enable OSPF. 2. In the Profile setting, choose the Interface which the routers use to exchange the routing information with ...
Vigor Static Routes
https://www.draytek.co.uk
The Vigor will have a static route set up - an instruction to re-route particular traffic through to another local gateway, instead of sending it onto the ...
VigorRoute如何設定為純路由(Routing)模式,含補充說明 ...
https://ublink.org
Vigor路由器預設皆為NAT模式,我們可以透過設定,指定特定的LAN port對WAN端連線時,強制為Routing模式。 下面我們將以此範例來說明. Router設定資訊. WAN IP ...
VLAN Routing on Vigor L2+ Switch
https://www.draytek.com
Switch Setup (For the model P2540x) · 1. Go to Switch LAN > VLAN Management > Create VLAN. · 2. In the Interface Settings. · 3. Go to VLAN ...